1.Taking national conditions into consideration,seven development tendencies of the numerical control system are summed up.

1.结合我国国情，总结了数控系统七大发展趋势。

2.The control system is a kind of hierarchical control system,which is composed of teach box,main microcomputer and hypogenous microcomputers.

2.控制系统采用模块化、分布式多级单片机控制方式，分为示教盒、主机、下位机三级。

3.Methods The system was a distributed digital control system consisting of a computer and zeitgeber generators.

3.方法生物节律测控及分析系统采用分布式控制方案，由测控计算机因子发生仪组成。

4.The selsyn-amplidyne antenna control system had its share of problems, particularly in selsyn units and wiring.

4.同步放大天线也会来掺一脚，尤其是同步组件配线。

5.It features new type stepmotor control system and real metering mechanism adjustable without shutdown the machine.

5.采用新型步进电机调整机构及真正不停机调整计量机构。

6.The embedded clinometer, indicating the vehicle status, is an important part of the XX fire control system.

6.嵌入式倾斜仪是XX火控系统重要组成部分，是映车体姿态测量装置。

7.A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

7.针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。

8.Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

8.利用PMK可编程调节器实现过程控制系统仿真,并对调节器进行参数整定。

9.An il-lustration of this way in a actual quilting motion control system indicates that this method has applied value.

9.通过在绗缝系统用,验证该模型实用性。

10.The control system will automatically transfer to this mode in the mode in the event of a boiler runback.

10.一旦锅炉自动减负荷，该控制系统将会自动地切换到这一汽轮机跟随方式。

11.Moreover, the proposed control system is of some fault diagnosis and protection functions, such as overcurrent, overvoltage-undervoltage, overtemperature and parameter overrun.

11.同，该电源控制系统还具有过流、过欠压、过热、参数超限等故障诊断与保护功能。

12.In short, author wish to supply some thinking and references for private enterprises that plan to reengine their internal control system.

12.总之，本文希望能给我国民营企业内部控制机制再造提供一些可借鉴思路方法。

13.Simple slitting line consists of uncoiler, disc slitting knife slitting machine, swelling depiler, takein machine and electromagnetic speed adjustment electric control system.

13.普通纵剪线主要由：开卷机、圆刀纵剪机、涨紧分料机、收卷机、电磁调速电控系统组成。

14.Automatic and effective control of malt kilning processing was realized by the control system.Flow monitoring of malt kilning was available by a computer.

14.通过该控制系统实现了麦芽干燥过程自动有效控制，通过上位机实现了麦芽干燥过程流程监控。

15.In this paper , pill-setover control system which used for incept and disposal of signal of space movement is devised and explored in detail.

15.本文对弹丸偏角控制系统空间运动信号接收与处理进行了全面设计与探索。

16.The simulation results indicate that the complex cascade control system have better performances and robusticity than PID control in the super-heated steam temperature s...

16.仿真结果表明,在过热蒸汽温度控制系统,采用复合串级控制,显著改善了汽温响特性,取得了令人满意效果。

17.It adds time delay to the controlling system that can control the time delay system inerrably and overcome the shortcomings of the traditional approximation method.

17.该方法将间滞后因子自然纳入系统控制机制，可完全无误差实现对滞系统控制，克服了传统近似法解决滞所带来误差问题。

18.It describes the designing, logic circuit, working principle and adjustment of the pneumatic rubber plate logic control system attached to the horizontal multiple-hollow-chisel mortiser.

18.详细阐明卧式多头打眼机气动膜片逻辑控制系统设计,逻辑线路,工作原理及其调试。

19.The mission of this article is to simplely design the bridge automation monitorial and control system inorder to establish a basis for the future design.

19.本文任务就是对桥梁自动化监控系统进行简单设计，为日后进一步设计奠定良好基础。

20.A new turbine-boiler coordination control system is designed for the 600 MW supercritical monotube boiler manufactured by Haerbin Boiler Plant with British Mitsm Babcock technology.

20.针对哈尔滨锅炉厂引进英国三井巴布科克技术制造600 MW超临界直流锅炉,设计了新型机炉协调控制系统。